S&S CYCLE

S&s 560s Cam 70-e77 B.t.

Part # DS199190

• —S&S cams are tested on the dyno, street and racetrack before being offered to the public
• —With hundreds of test hours on them, you know that you are getting the best cam S&S can produce
• —Recommend solid or performance aftermarket hydraulic lifters, stock hydraulic tappets are not recommended
• —Not recommended for stock displacement or lower compression engines
• —For 88" to 103" engines between 9:1 to 10:1 compression ratio
• —Best response from 3500 to 6000 rpm
• —Spring spacing required
• —Made in the USA
• —Installer must check coil bind, valve-to-valve clearance, valve-to-piston clearance and cam lobe to case clearance.