FEULING PARTS

Cam Kit Rs 487 St Chain Drive Center Water Cooled M8 17-

Part # 0925-1623

• —487 Reaper® Chain Drive Camshaft, Cam Installation Kit, Race Series® Sort Travel Lifters, One Piece Pushrod, Race Series® Oil Pump, High Flow Camplate, and ARP Rocker Studs and Nuts, Camplate/Oil Pump Fasteners are included in this kit
• —487 Reaper Camshaft.
• —Bolt-in
• —Chain Drive
• —Camshaft for 114" and 117" engine
• —Responds very well to increased bore and or compression
• —Maintains bottom end power and pulls hard above 2,950 rpm when compared to stock
• —RPM range 2,250 - 6,100
• —38° overlap
• —Cam specs measured in the engine on the lifter @ 0.050 using a 1.61 rocker arm ratio.
• —Cam Installation Kit
• —Includes cam bearing, cam/crank hardware and gasket/O-ring kit
• —Race Series® Short Travel Lifters
• —Short travel hydraulic roller lifters, standard OD (0.8420-0.8423)
• —Designed with 0.115 of total travel
• —One Piece Pushrod
• —HP+ 0.165 wall, +0.040 longer
• —Heavy duty 7/16" diameter tube with 0.165 wall thickness, precision concentricity, heat treated with a black oxide finish
• —Race Series® Oil Pump
• —Increase oil pressure, scavenge volume and engine oil flow
• —30% more pressure gear volume over stock
• —53% more scavenge gear volume over stock
• —42% more scavenge volume with port sizing, matched passages and holes to the engine case
• —46% more oil volume to the crankshaft and connecting rod bearing
• —15°- 25° cooler engine temperatures
• —15°- 30° cooler oil temperatures
• —10-30 more PSI of oil pressure
• —Reduces wet sumping, blow by and oily air cleaners
• —Magnets in oil pump to help protect gears and pressure relief valve
• —Rear wheel power gains of 2 horsepower and 2 ft. lb. of torque are achieved.
• —FEULING test results show a 50% reduction of engine sump oil level.
• —High Flow Camplate
• —Bolts into stock location
• —Billet 7075 aluminum
• —Made in the USA
• —Feuling does not recommend tuning beyond stock emissions standards.